Polyplastics (Nantong) DURACON® POM M9044 (CF2001)

Product Description

M9044 is a general-purpose injection molding copolymer polyoxymethylene resin produced by Polyplastics-Ticona (Nantong). It has moderate flowability, high rigidity, excellent wear resistance and low friction coefficient with outstanding dimensional stability. It supports secondary processing such as turning and ultrasonic welding. Compliant with RoHS and REACH SVHC, it is widely used for wear-resistant sliding parts including gears, bearings, sliding rails, zippers, electronic structural components and small automotive transmission parts.

Polyplastics DURACON® POM M9044 (CF2001)

Grade: M9044, Copolymer POM, General-purpose injection molding

Manufacturer: Polyplastics (Nantong Polyplastics-Ticona Engineering Plastics

)

Features: Moderate flow, high rigidity, excellent wear resistance, low friction coefficient, good dimensional stability. Suitable for ultrasonic welding and machining.

Flammability: UL94 HB (1.5 mm)

UL File No.: E168729

Compliance: RoHS, REACH SVHC

ISO Property Table

Processing Guideline

Pre-drying: 80–100 ℃ for 2–4 h, moisture ≤0.2%

Barrel Temperature: Rear 170–180℃ / Middle 180–190℃ / Front 190–200℃ / Nozzle 190–205℃

Mold Temperature: 60–100 ℃

Injection Pressure: 70–110 MPa

Back Pressure: 5–10 MPa

Screw Speed: 40–70 rpm

Note: POM decomposes easily at high temperature. Avoid long residence time. Max barrel temp ≤210℃. Regrind ratio ≤25%.

Applications

Gears, bearings, bushings, sliding rails, zippers, cams, electronic structural parts, automotive small wear-resistant components, pump parts.

Packing & Storage

25 kg per bag, natural pellets. Store in cool, dry and ventilated warehouse. Keep away from heat and open flame.

Recommended shelf life: 12 months in original sealed package.

Disclaimer

All data are typical values for reference only and not guaranteed specifications. Users shall verify material suitability by testing before production. Official PDF issued by Polyplastics shall prevail.